WERKU WK400280, Original Instructions Manual

English

4

into the accessory. Regularly clean this power 

tool’s air vents. The motor’s fan will draw the dust 

inside the housing and excessive accumulation of 

powdered metal may cause electrical hazards.

STORAGE.

Store power tools out of reach of children and not 

allow the handling of power tools to people unfami-

liar with the tools or these instructions. Power tools 

are dangerous in the hands of untrained users.

MAINTENANCE.

Check moving parts for misalignment or binding, 

there are no broken parts or other conditions that 

may affect the operation of power tools. Power tools 

are repaired before use when they are damaged. 

Many accidents are caused by poorly maintained 

power tools. Use power tools, accessories and tool 

tips, etc. according to these instructions and in the 

manner provided for the particular type of power 

tool, taking into account the conditions work and 

work to develop. The use of the power tool for appli-

cations other than those intended could result in a 

dangerous situation. Please check your power tool 

serviced by a Werku

®

  official  repair  service  using 

only identical replacement parts. This will ensure the 

safety of the power tool is maintained.

CHECK CONDITION.

Make sure that all the screws in the power tool 

are perfectly tightened.

In cold climates or when 

the power tool has not been used for a period, 

allow the power tool to warm up by leaving it to 

run empty for a few minutes, to ensure that all in-

ternal components are perfectly lubricated.

Make 

sure that the possible installed accessories are 

perfectly fitted in place.

BEFORE STARTING WORK.

Make sure that the power tool is firmly supported 

before using. Check that no one is standing be-

neath you when using the power tool in high areas. 

Keep your hands away from all moving parts of the 

power tool. Use auxiliary handles, if supplied with 

this power tool. Loss of control can cause personal 

injury.

DURING THE OPERATION.

Do not leave the power tool operating without ha-

ving  it  firmly  fixed.

Only turn it on when you are 

sure you have full control over it.

Do not point the 

power tool at anyone while in use.

When operating 

the power tool will produce vibrations.

The screws 

may gradually come loose, and possibly cause 

faults or accidents.

Keep your hands away from 

all moving parts of the power tool.

AT FINISH WORKING.

Do not touch the possible accessories installed in 

the power tool after use.

It may be hot and cause 

burns.

Some materials worked with may contain 

chemicals or toxic components.

Avoid inhaling 

these substances or allowing them to come into 

contact with your skin.

Use PPE designed to pre-

vent and protect against incidents of this kind.

DESCRIPTION OF THE PRODUCT.

The cordless driver drill has been designed to drill, 

screw and unscrew. Refer to this plan to familiarize 

yourself with the cordless driver drill before use.

6

9

8

1

10

4

5

7

3

2

1. Chuck.

2. Switch.

3. Rotation selector.

4. Handle.

5. Battery.

6. Torque selector.

7. Gear selector.

8. Battery charge Indicator.

9. LED lamp.

10. Belt clip.

USE INSTRUCTIONS.

Before starting up the cordless driver drill, we recom-

mend that you carefully read all of the instructions as 

indicated. Please respect all regulations regarding 

the prevention of accidents, health and safety direc-

tives, laws and applicable restrictions for work pla-