WERKU WK401210, Original Instructions Manual

English

3

PERSONAL SAFETY.

Stay alert, watch what you are doing and use 

common sense when operating this power tool. 

Do not use this power tool while tired or under the 

influence of drugs, alcohol or medicines. A moment 

of inattention while operating this power tool may 

cause serious personal damage.

USE PPE’S.

Wear personal protective equipment. Depending 

on application, use a face shield, safety goggles 

or safety glasses. As appropriate, wear dust mask, 

hearing protectors, gloves and workshop apron 

capable of stopping small abrasive or work piece 

fragments. The eye protection must be capable 

of  stopping  flying  debris  generated  by  various 

operations. The dust mask or respirator must be 

capable  of  filtrating  particles  generated  by  your 

operation. Prolonged exposure to high intensity 

noise may cause hearing loss.

DO NOT WORK ON TIPTOES.

Keep your feet on the ground and balance at all 

times. This enables better control of this power 

tool in unexpected situations.

DRESS PROPERLY.

Do not wear loose clothing or jewelry. Keep your 

hair, clothing and gloves away from moving parts. 

Loose clothes, jewelry or long hair can be caught 

in moving parts. If there are devices for connecting 

means for extracting and collecting dust, make sure 

they are connected and properly used. The use of 

these devices can reduce dust related hazards.

ELECTRICAL SAFETY.

The plug of this power tool must match with the base 

of the socket. Never modify the plug in any way. Do 

not use any adapter plug with earthed power tools. 

Unmodified  plugs  and  matching  bases  will  reduce 

the risk of electric shock.  Avoid body contact with 

grounded surfaces such as pipes, radiators, cookers 

and refrigerators. There is an increased risk of electric 

shock if your body is grounded. Do not expose power 

tools to rain or wet conditions.  Water entering this 

power tool will increase the risk of electric shock. 

DO NOT ABUSE THE CORD. 

Never use the cord to carry, lift or unplug this pow-

er tool. Keep the cord away from heat, oil, sharp 

edges or moving parts.  Damaged or entangled 

cords increase the risk of electric shock. When op-

erating a charger outdoors, use an extension cord 

suitable for outdoor use. The use of an extension 

cord suitable for outdoor use reduces the risk of 

electric shock. 

AVOID ACCIDENTAL STARTING.

Make  sure  the  switch  is  in  “off”  position  before 

connecting to the network, or when taking or 

carrying this power tool. Carrying power tools with 

your  finger  on  the  switch  or  plugging  in  power 

tools that have the switch in “on” position invites 

to accidents. Remove keys or tools before starting 

the power tool.  A left key or tool attached to a 

rotating part of a power tool can cause personal 

injury. Never lay this power tool down until the 

accessory has come to a complete stop. Do not 

run this power tool while carrying it at your side.

USE AND CARE.

Do not force the power tool. Use the correct power 

tool for your application. The correct power tool will 

do the job better and safer at the rate for which it was 

conceived. Do not use the power tool if the switch 

cannot be positioned to “off” and “on” position

. Any 

power tool that cannot be controlled with the switch 

is dangerous and must be repaired. Remove the 

plug from the power supply and/or battery before 

making any adjustments, changing accessories 

or storing the power tool. Such preventive safety 

measures reduce the risk of starting the power 

tool accidentally. Do not use accessories which 

are  not  specifically  designed  and  recommended 

by  Werku

®

. Just because the accessory can be 

attached to this power tool, it does not assure 

safe operation. Do not use a damaged accessory. 

Before each use, inspect the accessory. If this 

power tool or its accessory is dropped, inspect 

for damage or install an undamaged accessory. 

Regularly clean this power tool’s air vents. The 

motor’s fan will draw the dust inside the housing 

and excessive accumulation of powdered metal 

may cause electrical hazards.

STORE POWER TOOLS.

Store power tools out of reach of children and not 

allow the handling of power tools to people unfamiliar 

with the tools or these instructions. Power tools are 

dangerous in the hands of untrained users.