WERKU WK401210, Original Instructions Manual

English

4

MAINTENANCE.

Check moving parts for misalignment or binding, 

there are no broken parts or other conditions that 

may affect the operation of power tools. Power tools 

are repaired before use when they are damaged. 

Many accidents are caused by poorly maintained 

power tools. Use power tools, accessories and 

tool tips, etc. according to these instructions and 

in the manner provided for the particular type of 

power tool, taking into account the conditions work 

and work to develop. The use of the power tool for 

applications other than those intended could result 

in a dangerous situation. Please check your power 

tool serviced by a Werku

®

  official  repair  service 

using only identical replacement parts. This will 

ensure the safety of the power tool is maintained.

CHECK CONDITION.

Make sure that all the screws in the power tools 

are perfectly tightened. In cold climates or when the 

power tools has not been used for a period, allow the 

power tools to warm up by leaving it to run empty for 

a few minutes, to ensure that all internal components 

are perfectly lubricated. Make sure that the possible 

installed accessories are perfectly fitted in place.

BEFORE STARTING WORK.

Make sure that the power tool is firmly supported before 

using. Check that no one is standing beneath you when 

using the power tool in high areas. Keep your hands 

away from all moving parts of the power tool.

DURING THE OPERATION.

Do not leave the power tool operating without ha-

ving  it  firmly  fixed.

Only turn it on when you are 

sure you have full control over it.

Do not point the 

power tool at anyone while in use.

When operating 

the power tool will produce vibrations.

The screws 

may gradually come loose, and possibly cause 

faults or accidents.

Keep your hands away from all 

moving parts of the power tool.

AT FINISH WORKING.

Do not touch the possible accessories installed in 

the paint spray gun after use. It may be hot and 

cause burns. Some materials worked with may 

contain chemicals or toxic components. Avoid 

inhaling these substances or allowing them to come 

into contact with your skin. Use PPE designed to 

prevent and protect against incidents of this kind.

DESCRIPTION OF THE PRODUCT.

The paint spray gun has been designed to carry out 

jobs of painting.

Refer to this plan to familiarize your-

self with the paint spray gun before use.

9

5

6

4
1

6

7

3

2

8

1. Cup.

2. Sprayer.

3. Trigger.

4. Nozzle regulator. 

5. On/Off switch.

6. Hose connector

7. Nozzle replacement.

8. Transport handle.

9. Head release button.

USE INSTRUCTIONS.

Before starting up the paint spray gun, we recom-

mend that you carefully read all of the instructions 

as indicated.

Please respect all regulations regar-

ding the prevention of accidents, health and safety 

directives, laws and applicable restrictions for work 

places.

The paint spray gun must only be used by 

persons who have been instructed in its use and 

only for the purposes for which it has been designed.

POWER SUPPLY.

Make sure the power supply is adapted to the requi-

rements shown on the information panel of the paint 

spray gun (1).

Using the motor at low voltage will 

make it operate slowly.

This will reduce performance 

and may cause the motor to overheat.

EXTENSION CORD.

If the working area is at some distance from the 

power supply, use an extension cord of enough dia-

meter and quality.

PREPARATION.

Do not use textured paints as they will block the 

paint spray gun.

To obtain a perfect finish, the sur

-

face being painted must be prepared, and the paint 

diluted until reaching the correct degree of viscosi-

ty.

Make sure that the surface being painted is free