4
English
ENG
components
►
Avoid inhaling these substances
or allowing them to come into contact with your
skin
►
Use PPE designed to prevent and protect
against incidents of this kind.
DESCRIPTION OF THE PRODUCT.
►
The cordless demolition hammer drill has
been designed to carry out jobs of drilling with
percussion on concrete, brick and stone, as well
as drilling without percussion on wood, metal,
ceramics and synthetic materials
►
Refer to this
plan to familiarize yourself with the cordless
demolition hammer drill before use.
2
1
3
4
5
7
8
6
1. Chuck.
2. Auxiliary handle.
3. Handle.
4. Switch.
5. Battery.
6. Turn selector.
7. LED lamp.
8. Function selector.
USE INSTRUCTIONS.
►
Before starting up the cordless demolition hammer
drill, we recommend that you carefully read all of
the instructions as indicated
►
Please respect all
regulations regarding the prevention of accidents,
health and safety directives, laws and applicable
restrictions for work places
►
The cordless demolition
hammer drill must only be used by persons who
have been instructed in its use and only for the
purposes for which it has been designed.
POWER SUPPLY.
►
Make sure the power supply is adapted to the
requirements shown on the information panel of the
cordless demolition hammer drill (1)
►
Using the motor
at low voltage will make it operate slowly
►
This will
reduce performance and may cause the motor to
overheat.
BATTERY AND CHARGER.
►
If the battery housing is damaged, do not insert
it in the charger, as there may be a risk of electric
shock
►
The charger and battery are designed to
work together, do not attempt to charge the battery
with any other model of charger
►
Do not expose
the charger to damp conditions
►
The charger
is designed for use with rechargeable batteries,
any other type of use may pose a fire risk or
cause electric shocks
►
Keep the charger away
from sources of heat
►
Do not open the charger,
incorrect reassembly may increase the risk of fire,
explosion or electric shocks
►
Do not allow liquids
to enter the charger, as they may cause electric
shocks
►
Do not store the charger or the batteries
in temperatures higher than 40ºC
►
Never use the
charger at a different voltage to that specified by the
manufacturer
►
The batteries must not be opened
under any circumstances
►
Do not attempt to burn
batteries, even when they are empty or broken, as
they may explode
►
Do not charge the batteries in
air temperatures any lower than 4.5ºC or higher
than 40.5ºC to prevent damage
►
Both the charger
and battery may heat up during the charging
process, this is normal, and does not mean there is
a problem
►
The battery must be recharged when it
does not produce enough energy in situations when
it previously did, do not use the battery in these
conditions
►
Disconnect the charger from the mains
when it does not have a battery inserted.
BATTERY INSTALL.
►
To remove the battery hold the cordless
demolition hammer drill firmly by the handle, press
the battery catch and remove it (2)
►
Insert the
battery checking that the correct polarities are
used (3).
CHARGING BATTERY.
►
Insert the charger plug into the battery
►
Connect
the charger to the power supply
►
IIt will take 2 hours
to charge the battery fully at 20ºC
►
If the battery
overheats as a result of direct sunlight or other
factors, the pilot light may not illuminate
►
In this case,
leave the battery to cool and then restart the charging
process
►
Disconnect the charger from the power
supply
►
Hold the battery firmly and pull the charger
plug out
►
Due to their internal chemical composition,
batteries that have never been used or left unused for
long periods of time may not produce their full output
during their first or second use
►
This is a temporary
phenomenon, to restore the optimal battery activity,
repeat this process three times with each of them.
