WERKU WK403240, Original Instructions Manual

English

ENG 

ORIGINAL INSTRUCTIONS

3

6) Ensure that no liquid splashes against the housing 

of this power tool. Liquid that has penetrated this power 

tool can cause damage and lead to electric shock. 

7) Follow the instructions and warnings for the mate-

rial to be mixed. Material to be mixed may be harmful. 

8) If this power tool falls into the material to be mixed, 

unplug this power tool immediately and have it chec-

ked by a qualified repair person. Reaching into the 

mix container with this power tool still plugged in can 

lead to electric shock. 

9) Do not reach into the mix container with your hands or 

insert any other objects into it while mixing. Contact with 

the mix container may lead to serious personal injury. 

10) Start up and run down this power tool in the mix 

container only. The mix container may bend or spin in 

an uncontrolled manner. 

11) Use this power tool only with a mix container of at 

least 25 liter, height of 30 cm and diameter of 20 cm.

WORK AREA SAFETY.

Keep work area clean and well lit. Cluttered and 

dark areas invite accidents. Do not operate this 

power tool near flammable materials. Sparks could 

ignite these materials. Keep away from children and 

curious while operating a power tool. Distractions 

can cause you to lose control. Keep bystanders a 

safe distance away from work area. Anyone ente-

ring the work area must wear personal protective 

equipment. Fragments of work piece or of a broken 

accessory may fly away and cause injury beyond 

immediate area of operation.

PERSONAL SAFETY.

Stay alert, watch what you are doing and use com-

mon sense when operating 

this

 power tool.

Do not 

use 

this

 power tool while tired or under the influence 

of drugs, alcohol or medicines.

A moment of inat-

tention while operating 

this 

power tools may cause 

damage serious personal.

USE PPE’S.

Wear personal protective equipment. Depending on 

application, use a face shield, safety goggles or safety 

glasses. As appropriate, wear dust mask, hearing pro-

tectors, gloves and workshop apron capable of stop-

ping small abrasive or work piece fragments. The eye 

protection must be capable of stopping flying debris 

generated by various operations. The dust mask or 

respirator must be capable of filtrating particles gene

-

rated by your operation. Prolonged exposure to high 

intensity noise may cause hearing loss.

DO NOT WORK ON TIPTOES.

Keep your feet on the ground and balance at all 

times.

This enables better control of 

this

 power tool 

in unexpected situations.

DRESS PROPERLY.

Do not wear loose clothing or jewelry.

Keep your 

hair, clothing and gloves away from moving parts.

Loose clothes, jewelry or long hair can be caught 

in moving parts.

If there are devices for connecting 

means for extracting and collecting dust, make sure 

they are connected and properly used.

The use of 

these devices can reduce dust related hazards.

ELECTRICAL SAFETY.

The plug of this power tool must match with the base 

of the socket

.

Never modify the plug in any way

.

Do 

not use any adapter plug with earthed power tools

.

Unmodified  plugs  and  matching  bases  will  reduce 

the risk of electric shock

.

Avoid body contact with 

grounded surfaces such as pipes, radiators, cookers 

and refrigerators

.

There is an increased risk of elec-

tric shock if your body is grounded

.

Do not expose 

power tools to rain or wet conditions

.

Water entering 

this power tool will increase the risk of electric shock.

DO NOT ABUSE THE CORD. 

Never use the cord to carry, lift or unplug this pow-

er tool

.

Keep the cord away from heat, oil, sharp 

edges or moving parts

.

Damaged or entangled 

cords increase the risk of electric shock

.

When op-

erating this power tool outdoors, use an extension 

cord suitable for outdoor use

.

The use of an ex-

tension cord suitable for outdoor use reduces the 

risk of electric shock

.

If the use of this power tool 

in a damp location is unavoidable, use a power 

protected by a residual current device (RCD)

.

The 

use of an RCD reduces the risk of electric shock.

AVOID ACCIDENTAL STARTING.

Make sure the switch is in “off” position before con

-

necting to the network, or when taking or carrying 

this

 power tool. Carrying power tools with your finger 

on the switch or plugging in power tools that have the 

switch in “on” position invites to accidents. Remove 

keys or tools before starting this power tool. A left key 

or tool attached to a rotating part of this power tool 

can cause personal injury. Never lay this power tool 

down until the accessory has come to a complete 

stop. The spinning accessory may grab the surface 

and pull this power tool out of your control. Do not run 

this power tool while carrying it at your side. Acciden-

tal contact with the spinning accessory could snag 

your clothing, pulling the accessory into your body.