background image

2

English

ENG

CE DECLARATION CONFORMITY.

Werku

®

 declares that the

 WK500490

 airless 

gun is in accordance with the European 

Directives and Standards 2006/42/CE and 

EN12621:2006+A1:2010

.

La Coruña, 01/02/2018. 

R Yáñez

Werku Tools SA

TECHNICAL CHARACTERISTICS.

Airless pump >0.5 HP (375 W)

 

Working pressure 

60-160 bar 

Maximum pressure 250 bar 

Inlet 

thread NPS 1/4” 

Outlet thread BSP 7/8” 

Working 

temperature 5-40ºC 

Material temperature 

<43ºC

 

Net weight 0.380 kg 

Acoustic pressure LpA 

<89 dB(A) 

Acoustic pressure LwA <90.82 dB(A) 

Vibration Ah <0.715 m/s².

SAFETY INSTRUCTIONS.

Read all security warnings and all instructions 

Failure to follow all warnings and instructions 

listed below may result in electrical shock, fire 

and/or serious injury 

Keep all warnings and 

all instructions for future reference 

Accidents 

can be avoided in many cases by recognizing a 

potentially hazardous situation before it occurs and 

by observing appropriate safety procedures 

Do 

not use this airless gun for other applications than 

those specified in this manual.

SAFETY PRECAUTIONS.

Be safety-conscious 

All local and national 

regulations governing ventilation, fire prevention, 

and operation must be observed 

Hazard: 

Injection injury 

A high pressure stream produced 

by this airless gun can pierce the skin and 

underlying tissues, leading to serious injury and 

possible amputation 

Do not treat an injection 

injury as a simple cut 

Injection can lead to 

amputation 

See a physician immediately 

Inform the physician of the type of coating 

material or cleaning agent with which the injury 

was caused 

The maximum operating range of 

this airless gun is 250 Bar fluid pressure 

Never 

aim the airless gun at any part of the body 

Never 

allow any part of the body to touch the fluid stream 

Do not allow body to touch a leak in the fluid 

hose 

Never put hand in front of the airless gun 

Gloves will not provide protection against an 

injection injury 

Never point the airless gun at 

anyone else 

Always lock the airless gun trigger, 

shut the pump off and release all pressure before 

servicing, cleaning the tip or guard, changing 

tip, or leaving unattended 

Pressure will not be 

released by turning off the motor 

The prime/

spray valve must be turned to prime to relieve the 

pressure 

Refer to the pressure relief pressure 

described in the pump manual 

Always keep the 

tip guard in place while spraying 

The tip guard 

provides some protection but is mainly a warning 

device 

Always remove the spray tip before 

flushing or cleaning the system 

The hose can 

develop leaks from wear, kinking and abuse 

leak can inject material into the skin 

Inspect 

the hose before each use 

Never use an airless 

gun without a trigger lock and trigger guard in 

place and in good working order 

All accessories 

must be rated at or above the maximum 

operating pressure range of the airless gun 

This includes spray tips, extensions and hose 

Hazard: Explosion hazard due to incompatible 

materials will cause severe injury or property 

damage 

Do not use materials containing 

bleach or chlorine 

Do not use halogenated 

hydrocarbon solvents such as bleach, mildewcide, 

methylene chloride trichloroethane 

They are 

not compatible with aluminum 

Contact your 

coating material supplier about the compatibility 

of material with aluminum 

Hazard: General 

This airless gun can cause severe injury or 

property damage 

Read all instructions and 

safety precautions before operating this airless 

gun 

Never spray near sources of ignition; eg 

open flames, cigarettes (also cigars and pipes 

are sources of ignition), sparks, hot wires and 

hot surfaces, etc 

Wear respiratory equipment 

when spraying 

The operator must be provided 

with a protective mask 

In order to prevent work 

related illness, the manufacturer’s regulations 

for the materials, solvents, and cleaning agents 

used must be observed when preparing, working 

with and cleaning the airless gun 

Protective 

Summary of Contents for WK500490









































Reviews: