WERKU WK500490, Original Instructions Manual

6

English

ENG

MAINTENANCE.

►

Follow all safety precautions as described in the 

safety precautions section of this manual before 

proceeding 

►

Refer to the parts list section in this 

manual for part identification.

REPLACING/REMOVING FILTER.

►

Pull the bottom of the trigger guard forward so 

that it comes loose from the handle assembly (9) 

►

Loosen and remove the handle assembly from 

the airless gun head (10) 

►

Pull the old filter out of 

the gun head (11) 

►

Slide the new filter, tapered 

end first, into the airless gun head (12) 

►

Place 

the handle seal into the airless gun head with the 

flat side of the seal toward the gun head 

►

Thread 

the handle assembly into the airless gun head 

until secure 

►

Snap the trigger guard back onto 

the handle assembly.

FILTER CHART.

Application 

Synthetic resin, enamels, clean varnishes, stains, azures

Base coat enamels, primer enamels, fillers, marking 

paints, textured enamels

Filler paints, large area surfaces

Emulsions, latex paints, acrylic paints

Filter type

Extrafine

Fine

Coarse 

Medium

ENVIRONMENT PROTECTION.

►

The materials and components that have 

been used to manufacture this product can be 

re-used and recycled 

►

Werku

®

 is adhered to 

an Integrated Management System that is in 

charge of the correct elimination of the residues 

of this product. 

►

Do not eliminate this product 

with domestic residues 

►

Werku

®

 offers to its 

clients a free collection service of these residues 

through any of its sale points, or in the collection 

points established by the Integrated Management 

System or in the recycling point of your locality.

WARRANTY AND TECHNICAL SERVICE.

►

Apart from the legal guarantee, Werku

®

 offers an 

additional commercial guarantee 

►

This commercial 

guarantee covers the repair of all defects found due 

to faults in the materials or manufacture 

►

For this 

cover to be effective it is necessary for these defects 

to appear within the validity period 

►

The consumer 

is entitled to free repair of all defects that Werku

®

recognises as included in the commercial guarantee 

(shipping costs, labour costs and materials included) 

as chosen by Werku

®

, either via the repair or by 

replacement (if necessary with a later model) 

►

This 

commercial guarantee does not affect consumer’s 

rights established by law according to Directive 

1999/44/CE 

►

This commercial guarantee is valid 

for 24 months 

►

If this product is destined for 

professional or industrial use, the validity period is 

12 months 

►

The validity period starts on the date of 

purchase by the first consumer 

►

This date is shown 

on the invoice or receipt of purchase 

►

Actions for 

claims against this commercial guarantee expire 

six months from the end of the validity period 

►

Any 

claims arising from this commercial guarantee must 

be presented to the distributor or the Technical 

Assistance Service 

►

To do so you must present this 

guarantee correctly completed and stamped by the 

distributor, together with the sale invoice or receipt 

►

In order to require any information in relation to this 

commercial guarantee, the buyer and/or distributor 

may contact the Technical Assistance Service by 

telephone on +34 981 648 119, or by e-mail at info@

werku.com 

►

This commercial guarantee does 

not cover defects caused by parts that have worn 

out from use other types of natural wear, defects 

caused by failure to observe the instructions for 

use and operation, or for applications other than 

those for which this product is intended, abnormal 

environmental factors, overloading, or unsuitable 

maintenance or cleaning, faults caused by the use 

of spare parts, accessories or replacements that 

are not original Werku

®

 parts, if the product has 

been totally or partially disassembled, modified 

or repaired by personnel other than that of the 

Technical Assistance Service or minimum and 

irrelevant irregularities for suitable use or operation 

►

Repairs and replacements will not extend or renew 

the validity period of this commercial guarantee 

►

The replaced parts will become the property of 

Werku

®

►

If the buyer sends the product to the 

Technical Assistance Service, and it fails to comply 

with the conditions of this commercial guarantee, 

all expenses and transportation risks shall be paid 

by the buyer 

►

This commercial guarantee is only 

valid within the territory of the European Union 

►

The 

company responsible for the compliance of this 

Werku

®

 commercial guarantee is Werku Tools SA.

TECHNICAL ADVICE.

►

The technical department of Werku

®

 is at your 

disposal to resolve any questions you may have 

regarding to its products 

►

If you wish to contact our 

team, send an e-mail to info@werku.com.