WDT
POOLKLAR Touch Basic
English translation of the original German version of the operation manual - Version 1.1 (HW CB36 – FW V1.0.0) 2021_07_09
7/38
4
Scope of delivery – device description
4.1
Scope of delivery
The POOLKLAR Touch Basic is delivered with the following standard accessories.
- Buffer solutions pH7, pH4, redox test solution
- Electrode cleaner, distilled water
- Electrolyte solution for overwintering
- 2 pc. ½” measuring water ball valve with immersion pipe
- 10 m measuring water pipe 6x1 mm in PE
Customer-specific or order-related modifications are possible.
4.2
Check for transport damage
Please check the device and all accessories immediately upon receipt for transport damage and completeness.
4.3
Identification of the device
For spare part orders and troubleshooting, it is useful to know the device serial number and firmware version. The device serial
number is located on the identification plate on the right side of the control housing. The Firmware version can be called up via the
menu item Service
Info.
4.4
Device description
⑨
1.
Flow-through fitting Basic
2.
Flow monitoring
3.
pH electrode
4.
Redox electrode
5.
Dosing valve for pH value
6.
Dosing valve for disinfection
7.
Measuring water backflow
8.
Measuring water inlet
9.
Buffer solutions
10.
Control unit POOLKLAR Basic
11.
Dosing pumps SR10
12.
Hose bracket Basic
13.
Suction sets
(not shown in the
photograph)
③ ④
⑩
②
①
⑤
⑥
⑪
⑫
⑧
⑦
⑬
The POOLKLAR Touch Basic is delivered as a ready-assembled unit. All parts are mounted on a plastic plate. This ensures a quick
installation of the device.
For the transport, the electrodes 3+4 are removed from the measuring cell and delivered separately in a protective packing box. In
order to avoid deformation of the dosing hoses during extended storage, the two dosing heads 11 have been pulled off the motor
shaft.
The POOLKLAR Touch Basic is equipped with a touch-sensitive touch screen. This function is activated by touching a symbol (ICON).
The calibration menus come with additional text-based instructions.
In order to eliminate the risk of confusing the two chemicals as far as possible, the dosing technology is colour-coded throughout.
The colour-coding extends from the suction set over the associated dosing pump to the dosing valve.
The parts used for pH value regulation are located to the left and coded in red. The components used for disinfection are located
on the right and coded in yellow.
CAUTION!
If the two chemicals are switched, this leads to a malfunction of the addition of chemicals to the pool water! This
may result in significant overdosing!
