}
DANGER
5
PROPER SET-UP AND USE
(continued)
For safety, follow these set-up and use instructions:
PROPER CARE OF PRODUCT
For safety, follow these care instructions:
• Always keep ladder clean of all foreign materials. Clean after each use.
• Check moving parts regularly. Lubricate all moving parts regularly.
Use caution not to get lubricant on rungs or side rail.
• Never walk, bounce, or move ladder while on it.
• DO NOT OVER REACH. Always keep belt
buckle between side rails when climbing or
working. You may lose your balance and/or
tip ladder or scaffold.
• Windy conditions require extra caution.
• Use extreme caution when pushing or pulling
anything while standing on ladder.
• Never use ladder as a brace.
• The maximum weight of a person, tools,
and materials not to exceed load rating.
(Refer to labels on ladder.)
• DO NOT use any components not supplied or
approved by Werner Co. with this ladder.
• To set ladder up: Support ladder by laying
it on its side on the ground. Open to desired
allowable position and then stand ladder up.
Watch for overhead wires.
• Never use ladder jacks on this ladder, regard-
less of the manner in which it is being used.
DANGER
Metal conducts
electricity.
Contact with
electrical current
will result in
serious injury
or death.
NEVER
use this
product near an
electrical current.
