- -
- 19 -
6.10 BALANCING MODE
Before starting a wheel balancing cycle , the user can choose which balancing mode is properly,
between passenger cars or motorcycles wheel. To have access to this function , select with the
arrows UP and DOWN till the highlight indicate function n.7 at Fig.7 choose with
+
and
-
keys.
Fig. 11 Balancing mode PASSENGER CARS balancing mode MOTORCYCLE
6.11 HIDDEN WEIGHT PROGRAM / SPLIT PROGRAM
The hidden weight program can be used only with car wheel balancing programs No 4 and 5. This
function it's used to hide adhesive counterweight behind the rim spokes. If, at the end of a
balancing spin, the external weight will be in a visible position, it is possible to divide, and hide it,
between the two closest spokes.
This program can be used also with the balancing program No 7 for motorcycle wheels, it allows to
divide the counterweight in case the original position corresponds with a rim spoke making then
impossible the application in that position.
ATTENTION:
The 2 counterweights that replaces the original one have to be positioned
behind the 2 closest spokes on the left and right side of the original counterweight
position.
ATTENZIONE:
The possibility to use “hidden weight program” is automatically indicated
by the machine with a color of character “3P” (ref. 8 Fig. 7, page 12) : white on the
Blue screen means activated, white on the Green screen
To activate this program , proceed as follow:
At the end of the wheel spin , using an allowed program, press
3P
the unbalance visualization will
be automatically in a simplified mode view, but in this case the machine will show 3 square
indicator instead of typical 2.
At the top side of the screen will appear “SELECT POINT 1” (Fig. 12).
