- -
- 23 -
Fig. 16 – Optimization- Measure bare rim
At the end of the spin , on the top of the screen will appear “Bare rim UNBALANCE” and on the
bottom part the unbalancing value (Fig 17)
ATTENTION:
The unbalancing values which appear on this step has NOT to be correct,
but it will be only as an help to determinate the state of art of the rim.
Fig. 17 - Optimization – Bare rim unbalance.
Pressing again
START
the values disappear and on the top of the screen there will be “MEASURE
TIRE AND RIM”. Mount the tire on the rim and, once inflated at the correct pressure, mount the
complete wheel on the machine paying attention that the valve match with the red mark on the
LOGO
LOGO
