- -
- 29 -
AUTOSTART: with the keys
+
and
-
it will be possible , setting the wheel spin mode. Setting ON
mode, the wheel spin will be automatic when lowering the hood wheel; setting the OFF mode, the
wheel spin will be manual , pressing
START
key, only if the wheel hood is lowering down.
ADHESIVE WEIGHT: with the keys
+
and
-
, it will be possible, setting the adhesive weight
application on the wheel for the ALU prog. 4, 5 e 7 (see the chart at page 16), applying the
external weigth with the gauge arm , when “ADJUSTER” option is selected; or directly under the
flange, when “EASY MODE” option is selected. (see dedicated chapther 6.1.1 and 6.1.2 at page
14)
COUNTER: allowed to check number of total spin and check spin.
9.3 USG (SONAR SENSOR)
USG SENSOR: with the key
+
and
-
it will be possible , enabling the external SONAR sensor. ON
means automatic width of the rim; OFF means that the required width measurement has to bring
by the manual caliper (not standard included on the machine)
9.4 CLOCK
Ajusting and stored the date and clock
9.5 PRINT
Actually not available.
9.6 MISC
BRIGHTNESS: with the key
+
and
-
brightness is increase or decrease.
FACTORY SETTING: complete RESET of the original setting
ATTENTION:
The Factory RESET operation, will erase every parameters as a first factory
mounting. Please use it only when explicit asked by an expert engineers.
All the calibration MUST be re-setted.
LANGUAGE: Allowed to select the language of the machine. Actually the sofware allowed to
choose English, Italian, Poland
MACHINE INFO: gives information about the machine and the installed software.
