background image

CONTENTS

1 General information.............................................................................10

1.1 Importance and use of the manual.................................................................................10

1.2 Content .......................................................................................................................10

1.3 Storage...............................................................................................................................10

1.4 Weights and dimensions ..............................................................................................10

1.5 Packing disposal..........................................................................................................10

1.6 Lifting ..........................................................................................................................10

1.7 Safety .........................................................................................................................11

2 Operation..............................................................................................12

2.1 Machine set up............................................................................................................12

2.2 Operating instructions...................................................................................................12

2.3 Filling up......................................................................................................................13

2.4 Check of filling time ......................................................................................................13

3 Troubleshooting...................................................................................14

4 Special informations............................................................................16

4.1 Compressor demolition................................................................................................16

4.2 Spares................................................................................................................................16

4.3 Warranty ....................................................................................................................16

9

GB

GTEK AUTOMATION    26212 Dimension Drive, Suite 150    Lake Forest, CA  92630    Ph. 949-680-4242    www.gtek-automation.com

Summary of Contents for PC120-4C














Reviews: