WESAUDIO
3/15/17
_MIMAS USER MANUAL REV4
15
1)
Connection status: Show current status of connection:
a.
ON – Connection is established.
b.
OFF – Connection is NOT established.
c.
Connecting – Connection process is ongoing. If “Connecting” state is visible for longer
period of time (more then 5 seconds), and plugin has no control over the unit, that would
mean:
i.
HW unit is no longer connected to your Workstation.
ii.
HW unit was disconnected or detached by operating system for some reason.
iii.
Any other reason which should be consulted with
support@wesaudio.com
.
2)
Select connection button: This button shows all connected devices, if “drop-down” list with
element IDs is not visible, that means that no devices has been detected which support GCon
protocol.
3)
Toggle connection button: Button toggles connection status ON/OFF. Please note that button
works only if ID has been previously selected using “Select connection button”.
4)
Connection details: Additional connection information:
a.
USB – module has been connected through direct USB connection in front panel.
b.
S#X – Slot number which is functionality available in _Titan frame, and means that internal
connection protocol between module and Frame is engaged.
5)
Connection ID: Unique Connection ID of connected HW unit.
6)
Fast setup change: Button switches between available setups A/B/C. Please note that this presets
won’t switch any connection related parameters. That means Connection ID is shared between all
available setups (A/B/C) and won’t be changed if any of those buttons is hit.
7)
Undo: Undo last parameter change (up to 20). Please note that setup change button (A/B/C) clears
current history.
8)
Redo: Redo last parameter change (up to 20). Please note that setup change button (A/B/C) clears
current history.
9)
Drive: Drive button activates saturation mode described in Chapter 3.
10)
Meter selection: Selects particular meter:
a.
GR - gain reduction,
b.
IN – input signal,
c.
OUT – output signal.
11)
Menu: New menu button added in release 4.0:
a.
Copy/Paste Preset – allows to copy fast presets between each other, or between different
plugin instances.
b.
Memory write – allows to write current plugin state to hardware internal memory (option
active only when global setting “Plugin and hardware memory sync” is disabled).
WesAudio _MIMAS plugin contains two types of plugins: Mono and
Stereo. Mono plugin is designed to work with a single HW unit. Stereo plugin
links one plugin with 2 hardware units, which allows to keep two devices
configured exactly the same way.