WESAUDIO
3/15/17
_TITAN USER MANUAL REV3
15
6.2.
Ethernet
_Titan as any network device, can be connected to your workstation in following ways:
By joining your local area network (LAN)
Or directly connected to your workstation.
In some cases it is mandatory to set IP addresses* for your workstation and _TITAN.
Below you can find possible setup in your local area network, and how different devices can access
_TITAN resources:
(*) In case you would like _TITAN to join already existing network, most probably your workstation has IP
address already set up through static configuration entry, or through DHCP (by your router).
