Page
2
of
7
Folding Handle Scissors Lift Table
(Part # 260201)
Instruction Manual
ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR SCISSORS LIFT TABLE,
READ THESE INSTRUCTIONS ENTIRELY BEFORE USING.
1. GENERAL INFORMATION
1.1 DESCRIPTION
Thank you for purchasing a Folding Handle Scissor Lift Table. These tables feature a lever
release handle, a chrome plated foot pedal and handle and a foot operated pump.
1.2 SPECIFICATIONS
Part Number
260201
Model
LT-330SL
Capacity
330 lbs
Table Size
17.75” x 27.5”
Table Thickness
.07”
Raised Height
28.5”
Lowered Height
8.5”
Caster Size
4” x 1”
Locking Caster
Yes
Weight
98 lbs
Overall Width
17.75”
Overall Height
37”
Overall Depth
36”
Materials and specifications are subject to change without notice.
2. SAFETY INFORMATION
1) Read these instructions carefully before operation and get to know the performance and operation
requirements of the lift table.
2) Do not overload the hydraulic lift table. Overloading will cause damage to the hydraulic lift table.
3) It is forbidden for operators to stand or sit on the table during operation.
4) Do not insert hands or feet under the lowering table.
5) Brake the table when loading goods to prevent it from moving.
6) Off-set loading is forbidden when loading goods, goods should be distributed uniformly over the
table.
7) Loose or unstable goods are not permitted to be loaded.
8) The table can’t be moved when goods are being lifted.
9) The table can only be moved on flat and hard ground, do not use on sloped or rugged ground;
10) When putting goods on the table which has been hoisted, the weight of goods should be within
rated load.
Note:
The safety valve only works in the hoisting process, if the table has been hoisted, and then
has overweight load on it, the safety valve will not work (also possibly damaging the unit).
11) When loading and unloading goods on hoisted table, don’t drag goods in cross direction, which
may cause serious off-set loading and make the table turn over.
12) When maintaining and repairing the table, the stand bar should be used to support fork arm in
order to prevent table from falling (there should be no load on the table).
