13
EN
the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool that
cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect the
power tool’s operation. If damaged, have
the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control
.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow
for safe handling and control of the tool in unexpected
situations.
5. SERVICE
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This will ensure
that the safety of the power tool is maintained.
JIG SAW SAFETY
WARNINGS
1. Hold jig saw by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
2. Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Holding the workpiece by hand
or against your body leaves it unstable and may lead to
loss of control.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
OPERATING
INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for sawing wood, plastic, metal and
building materials while resting firmly on the workpiece. It
is suitable for straight and curved cuts with bevel angles to
45°. The saw blade recommendations are to be observed.
1. ON/OFF SWITCH (SEE FIG. A)
Depress to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON (SEE FIG. B)
Depress on/off switch then lock-on button, release on/off
switch first then lock-on button second. Your switch is now
locked on for continuous use. To switch off your tool just
depress and release on/off switch.
