Wesco WS2933, Manual

15

EN

PRODUCT SAFETY

GENERAL POWER TOOL 

SAFETY WARNINGS

WARNING! Read all safety warnings, 
instructions, illustrations and 

specifications provided with this power tool.

Read all safety warnings, instructions, illustrations and 
specifications provided with this power tool.

Save all warnings and instructions for future 
reference.

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

1)  Work area safety 
a)   Keep work area clean and well lit. 

Cluttered 

or dark areas invite accidents.

b)   Do not operate power tools in explosive 

atmospheres, such as in the presence of 
flammable liquids, gases or dust. 

Power 

tools create sparks which may ignite the dust or fumes.

c)  Keep children and bystanders away while 

operating a power tool. 

Distractions can cause 

you to lose control.

2)  Electrical safety
a)  Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 
not use any adapter plugs with earthed 
(grounded) power tools. 

Unmodified plugs and 

matching outlets will reduce risk of electric shock.

b)   Avoid body contact with earthed or 

grounded surfaces, such as pipes, 
radiators, ranges and refrigerators.

There 

is an increased risk of electric shock if your body is 
earthed or grounded.

c)  Do not expose power tools to rain or wet 

conditions.

Water entering a power tool will increase 

the risk of electric shock.

d)   Do not abuse the cord. Never use the 

cord for carrying, pulling or unplugging 
the power tool. Keep cord away from 
heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric 
shock.

e)  When operating a power tool outdoors, 

use an extension cord suitable for 
outdoor use.

Use of a cord suitable for outdoor use 

reduces the risk of electric shock. 

f)  If operating a power tool in a damp 

location is unavoidable, use a residual 
current device (RCD) protected supply.

Use 

of an RCD reduces the risk of electric shock.  

3)  Personal safety
a)  Stay alert, watch what you are doing and 

use common sense when operating a 
power tool. Do not use a power tool while 
you are tired or under the influence of 
drugs, alcohol or medication.

A moment of 

inattention while operating power tools may result in 
serious personal injury. 

b)  Use personal protective equipment. 

Always wear eye protection. 

Protective 

equipment such as dust mask, non-skid safety shoes, 
hard hat, or hearing protection used for appropriate 
conditions will reduce personal injuries. 

c)  Prevent unintentional starting. Ensure 

the switch is in the off-position before 
connecting to power source and/or 
battery pack, picking up or carrying the 
tool. 

Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 
invites accidents. 

d)  Remove any adjusting key or wrench 

before turning the power tool on. 

A wrench 

or a key left attached to a rotating part of the power tool 
may result in personal injury. 

e)  Do not overreach. Keep proper footing 

and balance at all times. 

This enables better 

control of the power tool in unexpected situations.

f)  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair and 
clothing away from moving parts. 

Loose 

clothes, jewellery or long hair can be caught in moving 
parts.

g)  If devices are provided for the connection 

of dust extraction and collection facilities, 
ensure these are connected and properly 
used. 

Use of these devices can reduce dust-related 

hazards.

h)    Do not let familiarity gained from 

frequent use of tools allow you to become 
complacent and ignore tool safety 
principles.

A careless action can cause severe injury 

within a fraction of a second. 

4)  Power tool use and care 
a)  Do not force the power tool. Use the 

correct power tool for your application. 

The correct power tool will do the job better and safer at