12
13. Attach the ground wire on the Upright Wire (74)
to the indicated hole in the Base (85) with a #8 x
1/2” Screw (12).
Press the indicated Grommet (21) into the Right
Upright (78).
Raise the Right Upright (78) and the Left Upright
(not shown).
85
74
78
13
12
Ground
Wire
21
Hole
15. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking
belt (see page 21). To protect the floor or carpet, place a mat under the treadmill.
14. Raise the Frame (55) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (76) so that the large
barrel and the latch knob are oriented as shown.
Attach the upper end of the Storage Latch (76)
to the bracket on the Frame (55) with a 3/8” x 2”
Bolt (75) and a 3/8” Nut (13).
Attach the lower end of the Storage Latch (76) to
the bracket on the Base (85) with a 3/8” x 2” Bolt
(75) and a 3/8” Nut (13). Note: It may be neces-
sary to move the Frame (55) back and forth to
align the Storage Latch with the Base.
Lower the Frame (55) (see HOW TO LOWER
THE TREADMILL FOR USE on page 19).
76
85
13
Large
Barrel
75
55
13
14
75
Latch
Knob
