Weslo Cadence 36, User Manual

PROBLEM: The walking belt slows when walked on

SOLUTION:

a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in

length. 

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-
come damaged. Remove the key and 

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 2 to
3 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sert the key and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.

c. If the walking belt still slows, please call our Customer Service Department, toll-free.

PROBLEM: The walking belt is off-center

SOLUTION:

a. 

If the walking belt has shifted to the left,

first remove

the key and 

UNPLUG THE POWER CORD

. Using the

allen wrench, turn the left rear roller adjustment bolt
clockwise, and the right bolt counterclockwise, 1/4 of a
turn each. Be careful not to overtighten the walking belt.
Plug in the power cord, insert the key and run the tread-
mill for a few minutes. Repeat until the walking belt is
centered. 

b. 

If the walking belt has shifted to the right,

first re-

move the key and 

UNPLUG THE POWER CORD

.

Using the allen wrench, turn the left rear roller adjust-
ment bolt counterclockwise, and the right bolt clockwise,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key and
run the treadmill for a few minutes. Repeat until the
walking belt is centered.

PROBLEM: The walking belt slips when walked on

SOLUTION:

a. If the walking belt slips when walked on, first remove

the key and 

UNPLUG THE POWER CORD

. Using the

allen wrench, turn both rear roller adjustment bolts
clockwise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each side of
the walking belt 2 to 3 inches off the walking platform.
Be careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt
is properly tightened.

Rear Roller Adjustment Bolts

2ÓÐ3Ó

b

b

a

a

20