11
11
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console.
To select the information mode, hold down the Stop
button and insert the key into the console. Next, re-
lease the Stop button. When the information mode is
selected, the following information will be shown:
The left display will show the
total number of hours that
the treadmill has been used.
The center display will show
the total number of miles (or
kilometers) that the walking
belt has moved.
The right display will show
An “E” (for English) or an “M”
(for metric). Press the Speed
increase button to change
the unit of measurement, if
desired.
IMPORTANT:
If a “d” ap-
pears in the right display, the
console is in the “demo”
mode. This mode is intended
to be used only when a
treadmill is displayed in a store. When the console is in
the demo mode, the power cord can be plugged in, the
key can be removed from the console, and the displays
will remain lit, although the buttons will not operate.
If a
“d” appears when the information mode is selected,
press the Speed decrease button so the “d” disap-
pears.
To exit the information mode, remove the key from the
console.
