ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small
parts used in assembly. Assembly requires the included allen wrench as well as your own phillips screw-
driver , two adjustable wrenches , and scissors .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
Uprights (14) until the treadmill is in the position shown.
1
Handrail Washer (16)–2
Extension Leg Screw (34)–2
3 1/2" Handrail Bolt (59)–2
5/16" Washer (32)–2
Handrail Bolt (15)–2
Screw (55)–6
Handrail Nut (82)–2
14
2. Insert one of the Extension Legs (41) into the treadmill as
shown. (Note: It may be helpful to tip the Uprights (14) in
the direction shown by the arrow as you insert the
Extension Leg.) Make sure that the Base Pad (36) is on
the bottom of the Extension Leg. Attach the Extension
Leg with an Extension Leg Screw (34). Push on the
head of the Extension Leg Screw while tightening it.
Attach the other Extension Leg (41) in the same way.
34
41
14
36
2
5
