background image

Part No. 232942 R1105A

Printed in Canada © 2005 ICON IP, Inc.

LIMITED WARRANTY

Shanghai Newlife Fitness Equipment, Inc. (Newlife), warrants this product to be free from defects in work-
manship and material under normal use and service conditions. The drive motor is warranted for five (5)
years after the date of purchase. Parts and labor are warranted for one (1) year after the date of pur-
chase.  

This warranty extends only to the original purchaser. Newlife's obligation under this warranty is limited to
replacing or repairing, at Newlife's option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be pre-authorized by Newlife. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-
use, improper or abnormal usage or repairs not provided by an Newlife authorized service center; prod-
ucts used for commercial or rental purposes; or products used as store display models. No other war-
ranty beyond that specifically set forth above is authorized by Newlife.

Newlife is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-
cidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Shanghai Newlife Fitness Equipment, Inc.

HOW TO ORDER REPLACEMENT PARTS

To order replacement parts, contact our Customer Service Department or write:

Shanghai Newlife Fitness Equipment, Inc.
Customer Service Department
Room 504, No. 16, Lane 1030
YanAn West Road
Shanghai, 200052, PR China

Tel: 

800-820-0915

Before calling, please note the following information:

• the MODEL NUMBER of the product (WATL27205.1)

• the NAME of the product (WESLO E-30 treadmill)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING and the PART

LIST attached in the centre of this manual)

 

Summary of Contents for Cadence E-30 Treadmill
























Reviews: