Weslo CARDIO STRIDE 4.0, User Manual

16

 SYMPTOM: THE WALKING BELT DOES NOT MOVE 

SMOOTHLY

a.   If the walking 

belt is over-

tightened, 

performance 

may be reduced 

and the walk-

ing belt may be 

permanently 

damaged. 

Using the hex 

key, turn both 

adjustment 

screws coun-

terclockwise 1/4 of a turn. When the walking belt is 

properly tightened, you should be able to lift each 

edge of the walking belt 2 to 3 in. (5 to 7 cm) off the 

walking platform. Be careful to keep the walking belt 

centered. Walk on the treadmill for a few minutes. 

Repeat until the walking belt is properly tightened. 

SYMPTOM: THE WALKING BELT SLIPS OR IS 

OFF-CENTER 

a.   If the walking 

belt slips when 

walked on, use 

the hex key to 

turn both adjust-

ment screws 

clockwise, 1/4 

of a turn. When 

the walking 

belt is properly 

tightened, you should be able to lift each edge of 

the walking belt 2 to 3 in. (5 to 7 cm) off the walk-

ing platform. Be careful to keep the walking belt 

centered. Walk on the treadmill for a few minutes. 

Repeat until the walking belt is properly tightened.

b.  

If the walking 

belt has shifted 

to the left side, 

use the hex 

key to turn the 

left adjustment 

screw clock-

wise, and the 

right adjustment 

screw coun-

terclockwise, 1/4 of a turn each. Be careful not to 

overtighten the walking belt. Walk on the treadmill 

for a few minutes. Repeat until the walking belt is 

centered. 

c.  

If the walk-

ing belt has 

shifted to the 

right side, use 

the hex key 

to turn the left 

adjustment 

screw counter-

clockwise, and 

the right adjustment screw clockwise, 1/4 of a turn 

each. Be careful not to overtighten the walking belt. 

Walk on the treadmill for a few minutes. Repeat 

until the walking belt is centered.

2 –3  in.

Screws

Walking Belt