9
6. Attach the console back to the Console (80) with
the four M4.2 x 12mm Screws (3) that you re-
moved in step 4.
See step 1.
Tighten the two M8 x 16mm Bolts
(1) on each side of the treadmill.
See step 2.
Tighten the M6 x 10mm Bolt (2) on
each side of the treadmill.
6
80
Console Back
3
3
5. Set the Console (80) on the Console Plate (81),
and insert the excess wire into the Handrail
Crossbar (83).
Make sure that no wires are
pinched.
Attach the Console (80) with four M4.2 x 12mm
Screws (3);
start all four Screws before tight-
ening any of them.
5
80
83
81
3
7. Tighten a M4.2 x 12mm Hood Screw (30) into
the Motor Hood (53).
7
53
30
