background image

11

Check the massage chair periodically to make sure
that all parts are properly tightened.

If the hand control does not function properly, check
the following things:

¥ Is the power cord plugged into a 120-volt outlet?

¥ Is the power switch on the back of the chair in the

ÒONÓ position?

¥ Is the hand control properly connected to the mas-

sage chair? (See assembly step 6 on page 7.)

The massage chair can be cleaned with a low-power
hand-held vacuum or a dry cloth. 

IMPORTANT: Never

use water or solvents to clean the massage chair.

HOW TO USE THE RECLINE CONTROL

To recline the chair, simply pull up on the recline 
control on the right armrest. Lean back in the chair
until you have reached the desired position. Release
the recline control.

To return the chair to the upright position, sit up in the
chair and pull up on the recline control. The chair back
will return to the upright position. 

HOW TO USE THE FOOTREST

To extend the footrest, pull back on the footrest control
arm on the right side of the chair, until you feel the
control arm lock into place. The footrest will extend.

To lower the footrest, simply push the control arm 
forward. 

Recline

Control

Footrest 

Control Arm

Footrest 

Maintenance                        

Summary of Contents for Daybreak 3100














Reviews: