Weslo EasyFit WLIVEL0063.1, User Manual

4

ASSEMBLY

STEP 1

Attach the front stabilizer (7) and the rear stabiliz-

er(8) to the Main frame(1) with Carriage bolts (11), 

Domed nuts(13) and Arc washers(12)

STEP  2

While another person holds the Upright (2) near 

the Frame (1), connect the Extension Wire (30) to 

the sensor Wire (31). 

Next, connect the Resistance Cable (17) to the 

Lower Cable (32) in the following way:

• See drawing A. Pull upward on the metal bracket 

on the Lower Cable (32), and insert the tip of the 

Resistance Cable (17) into the wire clip inside the 

metal bracket as shown.

• See drawing B. Firmly pull the Resistance Cable 

(17) upward and slide it into the top of the metal 

bracket as shown.

• See drawing C. Using pliers, squeeze the prongs 

on the upper end of the metal bracket together.

Push the Wires (30,31) and the Cables (17, 32)

downward into the Frame (1).

Tip: Do not pinch the wires and cables. Insert the 

Upright (2) into the Frame (1). Attach the Upright 

with three Screws (15) and three Washers (12).

A

B

C

9

 6

 6

9

17

32

32

17

Metalic 

support

Metalic 

support