7
STEP 3
1. Fix the Right swing tube(28R) onto the Handle-
bar post(17) with the Bolt(55) and the Flat wash-
er(54).
Note: First not tight them up.
2. Fix the Right pedal support tube(41R) onto the
Crank(10) with the Pedal bolt(43) and the Wave
shape washer(44),and then attach the Thin spring
washer(50) and the Nylon nut(51).
Note: First not tight them up.
3.Connect the Right swing tube(28R) and the
Right pedal support tube(41R) with the Bolt(34)、
Flat washer(35) and Nylon nut(36), then tighten
the Bolt(55)、the Bolt(34) and Nylon nut(51), finally
cover the Collar cap(31)、the Collar cap(48)、the
Collar cap(52) and the Collar cap(60).
4.Fix the Right pedal(40R) onto the Right pedal
tube(41R) with the Bolt(37)、the Flat washer(38)
and Nylon nut(39).
5.Use the same way to fix the Left pedal tube(41L)
、the Left swing tube(28L) onto the Crank(10)
and the Handlebar post(17),and finally fix the Left
pedal(40L) onto the Left pedal tube(41L).
STEP 4
Pull the Pulse sensor wire (57) out of the console
bracket hole of the Handlebar post (17),
and then fasten the handlebar (16) onto the Han-
dlebar post (17) with the Allen pan head screw (58)
and the Curved washer (30) and the Cap nut(25).
