Weslo Gym 650, User Manual

6

Before beginning assembly, carefully read the
following information and instructions:

•

Assembly requires two persons.

•

Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed. 

•

Tighten all parts as you assemble them, unless
instructed to do otherwise. 

•

As you assemble the weight system, make sure
all parts are oriented as shown in the drawings.  

•

For help identifying small parts, use the PART
IDENTIFICATION CHART.

The following tools (not included) are required
for assembly: 

• two adjustable spanners

• one rubber mallet

• one standard screwdriver

• one Phillips screwdriver

• lubricant, such as grease or petroleum jelly,

and soapy water.

Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end span-
ners, or a set of ratchet spanners.

Make Things Easier for Yourself

Everything in this manual is designed to ensure
that the weight system can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight system has
many parts and that the assembly process will
take time. Most people find that by setting aside
plenty of time, assembly will go smoothly. 

ASSEMBLY

1

2

68

59

Indent

Indent

These

holes are

smaller

than those

on the

opposite

side. 

1.

Orient the Stabilizer (2) as shown, with the
indented holes facing downward. Attach the
Base (1) to the Stabilizer with two M10 x 65mm
Carriage Bolts (59) and two M10 Nylon
Locknuts (68). 

Do not tighten the Nylon

Locknuts yet.

Insert two M8 x 63mm Carriage Bolts (58) into
the bottom of the Base (1). 

Note: It may be

helpful to place tape over the bolt heads to
hold them in place.

FRAME ASSEMBLY

Before beginning assembly, make sure
that you have read and understand the
information in the box above.

1

58