11
9
60
59
14
41
44
44
44
65
44
41
10a
10b
29
46
53
53
61
51
51
52
55
3
47
46
Grease
9. Orient an Upper Body Arm (41) as shown and
slide it onto the right Upper Body Leg (44).
Attach the Upper Body Arm (41) with two M8 x
40mm Bolts (60), two M8 Curved Washers (14)
and two M8 Acorn Nuts (59);
start both Bolts,
and then tighten the Acorn Nuts.
Attach the other Upper Body Arm (41) to the
other Upper Body Leg (44) in the same way.
10.
See drawing 10a.
Identify the Right Pedal Arm
(51) and orient it as shown.
Next, apply grease to the Right Pedal Arm
Axle (55).
Insert the Right Pedal Arm Axle (55) into the right
arm of the Crank (3), and
firmly tighten
the M17
Right Nut (52)
clockwise
onto it.
Repeat this procedure to attach the Left
Pedal Arm (46) with the M17 Left Nut (47).
IMPORTANT: You must firmly tighten the Left
Nut counterclockwise to attach it.
See drawing 10b.
Insert a Spacer (65) into the
lower end of the right Upper Body Leg (44).
Next, apply grease to an M8 x 55mm Bolt (61).
Attach the right Upper Body Leg (44) to the Right
Pedal Arm (51) with the M8 x 55mm Bolt (61),
two M8 Washers (53), and an M8 Locknut (29).
Attach the Left Pedal Arm (46) to the left
Upper Body Leg (44) in the same way.
Grease