13
13
14.
Make sure that all parts of the elliptical are properly tightened.
Extra parts may be included. Place a mat
under the elliptical to protect the floor.
13. While a second person holds the Console (1)
near the Upright (32), connect the wire on the
Console to the Upright Wire (33).
Tip: Avoid pinching the wires.
Attach the
Console (1) to the Upright (32) with four M5 x
10mm Screws (2);
start all the Screws, and
then tighten them.
Avoid pinching
the wires
1
33
32
2