background image

HOW TO ADJUST THE POSITION OF THE SEAT  

For effective exer-
cise, the seat
should be in the
proper position. As
you pedal, there
should be a slight
bend in your knees
when the pedals
are in the farthest
position. To adjust
the seat, first turn
the seat knob coun-
terclockwise to loosen it (if the seat knob is not loos-
ened enough, it may scratch the frame). Next, slide
the seat to the desired position, and then retighten the
seat knob. 

IMPORTANT: After you adjust the seat,

make sure that your knees will not touch the han-
dlebar or the console when you pedal.

HOW TO ADJUST THE PEDAL STRAPS

To adjust the pedal
straps, first pull the
straps off the tabs
on the pedals.
Press the straps
back onto the tabs
using different
holes in the straps.

HOW TO ADJUST THE RESISTANCE 

To increase the
resistance of the
pedals, turn the
resistance knob
clockwise; to
decrease the resis-
tance, turn the knob
counterclockwise.

Important: Stop
turning the knob
when turning
becomes difficult,
or damage may result.

FEATURES OF THE CONSOLE

The easy-to-use console is designed to help you get
the most from your workouts. As you exercise, the
console will display the following modes:

Time—This mode displays the elapsed time (or the
time remaining in a pace program). Note: If you stop
pedaling, the time will begin to flash.

Distance—This mode displays the distance that you
have pedaled.

Calories—This mode displays the approximate num-
ber of calories you have burned.

Fat calories—This mode displays the approximate
number of fat calories you have burned (see FAT
BURNING on page 13).

Pulse—This mode displays your heart rate when you
use the pulse sensor.

Speed—This mode displays your pedaling speed.

Scan—When this mode is selected, the upper section
of the display will show both the speed mode and the
distance mode, and the lower left section of the dis-
play will show the calories mode and the fat calories
mode.

The console also offers four pace programs. Each pro-
gram automatically prompts you to increase or
decrease your pace as it guides you through an effec-
tive workout.

9

Seat

Seat

Knob

HOW TO OPERATE THE EXERCISE CYCLE

Resistance

Knob

Strap

Tab

4

2

Summary of Contents for Pursuit E45 Bike

















Reviews: