5
3. Attach the Seat (4) to the Seat Carriage (28) with three
M8 Washers (53) and three M8 Nylon Locknuts (46).
Note: The Washers and Nylon Locknuts may be
pre-attached to the underside of the Seat.
Next, slide the Seat Carriage (28) onto the Seat
Post (34). Insert the Seat Knob (20) into the Seat Post
and the Seat Carriage and turn the Seat Knob clock-
wise until it is tight.
Make sure that the Seat Knob is
inserted into the hole in the Seat Carriage
.
Remove the Seat Post Knob (29) by turning it counter-
clockwise. Next, insert the Seat Post (34) into the
Frame (1). Align one of the adjustment holes in the
Seat Post with the indicated hole in the Frame. Insert
the Seat Knob into the Frame and the Seat Post, and
turn the Seat Knob clockwise until it is tight.
Make sure
that the Seat Post Knob is inserted into one of the
adjustment holes in the Seat Post.
46
4
53
46
29
Hole
1
34
53
28
3
20
2. While another person lifts the front of the Frame (1),
attach the Front Stabilizer (6) with two M8 x 75mm
Carriage Bolts (16), two M8 Curved Washers (44), two
M8 Spring Washers (59), and two M8 Acorn Nuts (35).
44
44
1
35
35
6
2
16
59
59
