8
6. Attach the Handlebar (49) to the Upright (13)
with two M8 x 65mm Button Bolts (50), two M8
Split Washers (42), and two M8 Locknuts (10).
6
50
49
13
10
42
42
8. While a second person holds the Console (16)
near the Upright (13), connect the console wire
to the Extension Wire (23). Then, insert the
wires downward into the Upright.
Attach the Console (16) to the Upright (13) with
four M4 x 16mm Screws (46).
Do not pinch
the wires.
8
Do not pinch the
wires during this
step
23
46
13
Console Wire
16
7. The Console (16) requires four AA batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents.
Remove the battery cover, insert the bat-
teries into the battery compartment, and reat-
tach the battery cover.
Make sure to orient the
batteries as shown by the diagram inside
the battery compartment.
7
Batteries
Screw
Battery
Cover
16
Meijer.com
Summary of Contents for PURSUIT S 2.8
Page 16: ...16 NOTES Meijer com ...
Page 17: ...17 NOTES Meijer com ...
