Weslo Pursuit T 39 Exercise Bike, User Manual

6

6. The Console (16) requires four AA batteries; alkaline

batteries are recommended. Press the tab on the

battery cover and remove it. Insert four batteries into

the Console as shown. Make sure that the batter-

ies are oriented as shown by the diagram on the

battery cover. Then, reattach the battery cover.

6

5

5. While another person holds the Upright (13) near 

the Frame (1) as shown, connect the Extension Wire

(23) to the Reed Switch Wire (39). Next, connect the

Resistance Cable (19) to the Lower Cable (29) in the

following way:

• See drawing A. Pull up on the metal bracket on

the Lower Cable (29), and insert the tip of the

Resistance Cable (19) into the wire clip inside of

the metal bracket as shown. 

• See drawing B. Firmly pull the Resistance

Cable (19) upward and slide it into the top of the

metal bracket as shown. 

• See drawing C. Using pliers, squeeze the prongs

on the upper end of the metal bracket together.

Push the Wires (23, 39) and the Cables (19, 29)

downward into the Frame (1). 

Next, insert the Upright (13) into the Frame (1). Be

careful to avoid pinching the wires and cables.

Attach the Upright with three M8 x 15mm Button

Screws (34) and three M8 Split Washers (42).

A

B

C

29

19

19

Metal

Bracket

Metal

Bracket

29

16

Be careful to

avoid pinching

the wires and

cables.

Batteries

Battery

Cover

34

39

19

29

42

34

23

13

1

42