Fully charge the battery prior to first operation. In a
separate container, prepare the solution you want to
spray according to the manufacturer’s instructions.
Open the tank cap and carefully pour the solution
in. Securely tighten the tank cap.
Determine which nozzle or attachment is
appropriate for your project. Pull back on the brass
collar of the quick-connect fitting on the spray gun.
Insert the nozzle or attachment then push the fitting
back into its original position.
a) Short nozzle = adjustable conical ranging from jet
stream to mist
b) 18-Inch Extension wand = adjustable, ranging
from jet stream to mist
Making sure the ON/OFF switch is in the ON
position, disengage the handle lock (if necessary)
and squeeze the trigger on the spray gun to begin
spraying. When first beginning to spray, it is normal
for the pump to take a few seconds to build up
pressure and draw liquid up from the tank and
through the hose.
STEP 2.
PREPARING TO SPRAY
A)
B)
C)
Copyright © WESSOL, LLC
9
