background image

 

2

CAUTION:

 To prevent personal injury or property damage, screws must be inserted straight into griddle mounting 

projections for proper assembly.  To prevent stripping of threads, do not over tighten screws. 
 
4.  To assure proper installation of griddle handles, place assembled unit right side up on a flat surface and lift item 

with handles.  Handles should feel tightly secured. 

5.  If the griddle rocks when placed on a flat surface, remove screw on the leg which is not resting on the surface.  

Install one of the enclosed washers between the griddle mounting projection and the handle.  Replace the screw 
following instructions 3 and 4 above.  If the griddle is not level after the addition of the washer, add the second 
leveling washer in the same manner as the first. 

 

BEFORE USING THE FIRST TIME:

 

CAUTION:

 To prevent personal injury or electric shock, always remove temperature control before immersing this 

product in water.  Do not immerse the temperature control, its cord or plug in water or other liquid. 
 
1.  Wash griddle thoroughly in hot soapy water with a dishcloth or sponge to remove any manufacturing oils.  Rinse 

thoroughly and dry.  Be sure temperature control socket is completely dried. 

2.  Condition the non-stick finish by lightly wiping two teaspoons of cooking oil with paper toweling or a soft cloth 

over the entire surface.  Let cooking oil remain on the finish.  Do not use butter or shortening to condition the 
non-stick surface.  Your griddle is now ready for use. 

 

DAILY USE:

 

1.  Always use griddle on a dry, level, heat-resistant surface.  Do not operate griddle when hands are wet.  Attach 

temperature control to griddle.  Be sure dial is set at OFF.  Plug cord into a 120-volt AC electrical outlet ONLY. 

CAUTION:

 To prevent personal injury or property damage, inspect cordset for damage or wear before each use.  Do 

not use your product if it, its cord or plug have been damaged or if it is not working properly. 
 

CAUTION:

 Your griddle has a short cord as a safety precaution to prevent personal injury or property damage 

resulting from pulling, tripping or becoming entangled with the cord.  Do not allow children to be near or use this 
griddle without close adult supervision.  If you must use a longer cordset or an extension cord when using the griddle, 
the cord must be arranged so it will not drape or hang over the edge of a countertop, tabletop or surface area where it 
can be pulled on by children or tripped over.  To prevent electric shock, personal injury or fire, the electrical rating of 
the extension cord you use must be the same or more that the wattage of the griddle (wattage is stamped on underside 
of griddle). 
 
2.  Refer to the Temperature Guide in this booklet for selecting correct heat settings. (If food is taken directly from 

freezer, use heat setting as indicated on guide, but allow longer cooking time.)  Most foods require a preheat 
period.  See cooking chart. 

3.  The signal light on the temperature control will go out when the cooking temperature has been reached; add 

food.  Heat may be increased or decreased, depending upon personal preference and the type or amount of food 
being prepared.  The signal light will go on and off periodically to indicate that proper temperature is being 
maintained. 

4.  Foods may be prepared with or without fats.  When frying, the use of a small amount of butter, fat or oil will 

improve the flavor, color and crispness of foods.  When frying fatty foods such as bacon or sausage, excess 
grease will collect in the grease well.  If a large quantity of food is being prepared, you may find it necessary to 
remove grease from the well as it accumulates.  Either remove excess grease from well during cooking using a 
baster, or after food is removed, lift griddle by handles and carefully pour grease from either end of grease well 
into a heat-resistant container. 

CAUTION:

 To prevent personal injury or property damage, always exercise caution when removing hot grease. 

 
5.  Nylon, plastic, wooden or rubber cooking tools are recommended for use on the non-stick surface.  Smooth-

edged metal cooking tools may be used with care.  Do not use sharp-edged cooking tools such as forks, knives or 
food choppers as scratching may occur.  Minor scratching will affect only the appearance of the finish; it will not 
harm its non-stick property. 

6.  When cooking period is completed, set the temperature control dial at 

WARM

 for later serving, or set dial at 

OFF

 if food will be removed immediately from griddle.  After the dial is set at 

OFF

, disconnect cord from wall 

outlet.  Let griddle cool before removing temperature control. 

Reviews: