Lower Section Assembly
1. Locate the X-drop base. Loosen the dial on
the runner located on the center tube and
slide downward, extending each of the legs
outward similar to a tripod. Once extended,
turn the dial to lock the legs into place.
Do not over tighten
.
2. Open the clasps closest to the foot of each
leg.
3. Fully extend the lower section of each leg
and close the clasps to lock them into place.
6. Extend the remaining section until the top of
the backdrop is straight and taut. Close the
clasps to secure the position.
7. Locate the two grommets at the bottom of
the backdrop and attach them to the hooks
on the front legs.
5' x 7' and 5' x 12' Backdrop Assembly
Step 6, Upper Section
Step 7, Upper Section
Step 1, Lower Section
Step 3, Lower Section
Summary of Contents for drop Pro
Page 1: ...Quick Start Guide ...
