Upper Section Assembly
1. Insert the shortest extension arm into the
middle receptacle of the X-drop’s center
hub with the black hooks facing forward.
2. Slide the 2 remaining extension arms into
position closest to the center tube of
the outermost receptacle openings. The
arms will click into place. (To release the
arms, press the tabs located on the front
and back of the hub and pull the arm out
of the receptacle.)
3. Open both sets of clasps on each arm.
4. Fully extend the outermost sections and
close the clasps to lock them into place.
5. Attach the top of the backdrop that has
3 grommets to the corresponding arm’s
hook.
6. Extend the next section about halfway
until the top of the backdrop is straight
and taut. Close the clasps to secure the
position.
7. Locate the two grommets at the bottom
of the backdrop and attach them to the
hooks on the front legs.
Step 6, Upper Section
Step 7, Upper Section
Step 5, Upper Section
Step 3, Upper Section
Step 2, Upper Section
Summary of Contents for drop Pro
Page 1: ...Quick Start Guide ...
