Draft 1 - 07/11/06
030-300417 Rev. A
17
July 2006
Media Gateway (Model WMT)
User Guide
If you changed the
VPI/VCI
settings and clicked on
done
in the
SET-UP COMPLETE
screen, the following
screen will appear. Click on
OK.
NOTE: The following pop-up will appear only if you have changed the
VPI
,
VCI
, or
Protocol
values in the
preceding screens. If you did not change any of these values, this pop-up screen will not appear and Media Gateway
will not be reset. If the Media Gateway’s connection setting is set to “Always On” and you have changed any of
these values, Media Gateway will reset automatically. For instructions on editing your connection settings, see
section 11.2.
If you clicked on
OK,
the following screen will be displayed. Media Gateway will be reset and the new
configuration will take effect.