Draft 1 - 07/11/06
030-300417 Rev. A
40
July 2006
Media Gateway (Model WMT)
User Guide
13.2.1 Configuring UPNP on the Media Gateway
Note: To use the UPNP functionality in the Media Gateway, your Windows XP operating system must also support
UPNP. Please contact your computer manufacturer to verify that UPNP is enabled in your Windows XP operating
system.
To enable UPNP on Media Gateway perform the following steps:
1)
Select
Service Configuration
from the Configuration screen
2)
Click the
UPNP Enable
box (a check mark will appear in the box).
3)
Follow the instructions in the pop-up screens.
4)
Click
OK
to Reset the Media Gateway.
NOTE: When you are ready to disable UPNP, uncheck the
UPNP Enable
box in the
Service Configuration
screen.
If you click the
UPNP Enable
box in the
Service Configuration
screen, a check mark will appear in the box and
the following pop-up screen will be displayed. Click
OK
to continue.
If you click
OK
in the preceding screen, the following pop-up screen will be displayed. Click on
OK
to reset the
Media Gateway.