Draft 1 - 07/11/06
030-300417 Rev. A
47
July 2006
Media Gateway (Model WMT)
User Guide
For example, the screen below displays
America Online
as the NAT service selected. After you have selected a
service, click on
enable.
If you click
enable
, the following pop-up screen will be displayed. If you click
OK
, you will allow incoming
connections to be forwarded to a designated local PC. If you click
Cancel
, you will allow only outgoing connections
from any local PC. Click
OK
or click
Cancel.
NOTE: If you click
Cancel
in the following pop-up screen, the NAT service you selected in the
Service Configuration
screen is still configured; however, it will not be assigned to any device on the local LAN. You must click
OK
to host
the NAT service.