28
Product information from
westerbergs
Box 525, 301 80 Halmstad, Sweden
28
Product information from
westerbergs
Box 525, 301 80 Halmstad, Sweden
Displayed regularly, e.g. every 30 days.
The RCD is an important safety component and must be tested regu-
larly to ensure that it is functioning correctly.
All users must have learned how to safely test the RCD that is part
of the spa installation. An RCD has a TEST and RESET button which
allows the user to check that it is working correctly.
Alternates between temperature and normal display.
Warning
!
If there is a risk of freezing, you must reset the RCD immediately to
avoid damage to the spa. The end user must always be able to test
and reset the RCD regularly.
Displayed regularly, e.g. every 90 days.
Change the water in the spa regularly to maintain hygiene and the
correct chemical balance.
Alternates between temperature and normal display.
Displayed regularly, e.g. every 180 days.
The vinyl cover must be cleaned and maintained to ensure maximum
lifespan.
Toggles between temperature and normal display.
Displayed regularly, e.g. every 180 days.
The wooden panel and furniture must be cleaned and maintained
according to the manufacturer’s instructions to ensure maximum
lifespan.
Toggles between temperature and normal display.
Displayed regularly, e.g. every 365 days.
The filter must be changed regularly in order to maintain hygiene and
ensure that the spa works correctly.
Toggles between temperature and normal display.
As required.
Install a new mineral cassette
Toggles between temperature and normal display.
The water may become too hot.
SWITCH OFF THE SPA. DO NOT GET INTO THE WATER.
Contact the supplier or service organisation.
A pump appears to have become stuck in an ON position when
the power to the spa was last switched on – M035
SWITCH OFF THE SPA. DO NOT GET INTO THE WATER.
Contact the supplier or service organisation.
*This message can be reset by pressing any button on the panel on
the top.
REMINDER MESSAGES
General maintenance help
Reminder messages can be switched off using the PREF menu.
Reminder messages can be selected individually by the manufac-
turer. They can be switched off entirely, or there may be a limited
number of reminders on a specific model. The frequency of each re-
minder (e.g. every seven days) can be specified by the manufacturer.
Press a temperature button to reset a displayed reminder message.
Displayed regularly, e.g. every seven days.
Check the pH value using a test kit and adjust the pH value using
suitable chemicals.
Alternates between temperature and normal display.
Displayed regularly, e.g. every seven days.
Check the level of disinfectant and other chemicals in the water us-
ing a test kit and adjust using suitable chemicals.
Toggles between temperature and normal display.
Displayed regularly, e.g. every 30 days.
Clean the filter media in accordance with the manufacturer’s instruc-
tions.
Toggles between temperature and normal display.
Product information from
westerbergs
PO Box 525, SE-301 80 Halmstad, Sweden
ENG
