Safety
Page
15
of
55
4.12
Observance of the operating manual
The operating manual is provided by the manufacturer or
supplier of the product in order to provide the user with
essential knowledge for the proper and safe use and to
point out dangers in handling the machine.
Before starting up the machine, the operating manual must be worked
through; it must be observed carefully during start-up. We point out that we
accept no liability for damage and malfunctions resulting from non-
compliance with the operating manual.
The illustrations and information contained in the operating manual are
subject to technical modifications necessary for the improvement of the
machine.
4.13
Residual hazards and protective measures
The knowledge and technical implementation of the safety instructions
contained in this documentation is a prerequisite for a faultless product.
However, this documentation cannot cover all the details of every
conceivable case of machine use.
Therefore, as in any other case, especially due to human error, there is a
residual risk. This residual risk should be kept to a minimum by this
documentation.
4.14
Safety marking on the machine
Danger and information points, as well as important
information must be marked on the machine and,
if necessary, due to dirt or if unrecognisable, cleaned or renewed.
