Page
24
of
55
Start-up
10
Start-up
10.1
Checking the engine before start-up
The following steps are to be carried out regularly before each use.
(1)
Oil filler neck
(2)
Dipstick
(A)
The engine oil level
within this range is correct.
Fig. 7 - Hydraulic oil level
Checking the engine oil level
The oil quantity is checked with a dipstick! Pull
dipstick out:
Oil quantity must be in the area of the corrugated
marking (A)!
The oil dipstick is located on the left
side of the engine in the direction of
travel at frame recess level.
Checking the hydraulic oil level
The oil quantity is checked with a dipstick! Pull
dipstick out:
Oil quantity must be in the marked area!
The oil dipstick is behind the driver's
seat on the right side of the
combination tank in the direction
of travel.
Fig. 8 - Fuel supply
Checking fuel tank contents
The amount of fuel is checked at the tank! Open the
cap. In addition, the machine has a reserve tank
display.
The fuel tank is behind the driver's seat on
the left of the combination tank in the
direction of travel.
Fig. 6 - Oil level
