Page
36
of
55
Maintenance and servicing
13.8
Procedures after maintenance
After completing the maintenance, perform the following steps:
Make sure that all previously loosened screw connections are
tightened.
Ensure all previously removed guards and covers are properly
reinstalled.
Ensure all tools, materials, and other equipment used have been
removed from the work area.
Clean work area and remove any leaked liquids. Remove
cleaning material such as cloths, etc.
Make sure all safety devices are working properly.
13.9
Notes regarding maintenance work
For maintenance work and the associated replacement of
components only the use of original spare parts is allowed.
13.10
Documentary list
Incidents and interference must be recorded in a
documentary list. The documentary lists must be filed electronically and/or
in paper form.
