44
6195-2201
+CMGW – Write Message to Memory
This command stores a message to memory storage (either SMS-SUBMIT or
SMS-DELIVERS). The memory location <index> is returned (no choice possible
as with phonCPBW).
The entering of text or PDU is done similarly as specified in command Send Message
+CMGS.
Command syntax in text mode:
(<index> is returned in both cases)
AT+CMGW= <oa/da> [,<tooa/toda> [,<stat> ] ] <CR>
enter text <ctrl-Z / ESC>
Command syntax in PDU mode:
AT+CMGW= <length> [,<stat>] <CR>
give PDU <ctrl-Z / ESC>
Response syntax:
+CMGW: <index>
or +CMS ERROR: <err> if writing fails
Parameter Definition:
<oa/da>: Originating or Destination Address Value in string format.
<tooa/toda>: Type of Originating / Destination Address.
<stat>: Integer type in PDU mode (default 2 for +CMGW), or string type in text mode
(default ”STO UNSENT” for +CMGW). It indicates the status of message in memory.
If <stat> is omitted , the stored message is considered like a message to be send.
Defined <stat> values:
PDU mode
Text mode
0
”REC UNREAD”
1
”REC READ”
2
”STO UNSENT”
3
”STO SENT”
<length>: The length of the actual data unit in octets
Example:
Application to GSM
AT+CMGW=”+33146290800”<CR>
Write a message in
Hello, how are you?<ctrl-Z>
text mode
GSM to application
+CMGW: 4
Message stored in
OK
index 4
Application to GSM
AT+CMGW=<length><CR>
Write a message in
<pdu><ctrl-Z>
PDU mode
GSM to application
+CMGW: <index>
Message stored in
OK
<index>
Summary of Contents for GS-01
Page 55: ......
