background image

 

WMARINE10 – Technical Manual           

Rev. 1.0  

28-12-2011 

 

 

14

 

Warranty 

Western Co. Srl  guarantees the good quality and manufacturing of its products obliging itself, during the 
warranty period of 2 (two) years, to repair or replace at its sole discretion, for free,  those parts that are 
defective owing to poor quality material or workmanship defect. 
The defective product must be returned to Western Co Srl by a delegated company for assistance, at the 
expense of the customer, along with a copy of the sales invoice, both for repairing and guaranteed 
replacement. The costs of re-installation of the material will be borne by the customer. 
Western Co srl will pay the transport expenses for the shipment of the repaired/replaced product. 

 

Warranty does not cover Products that, according to our discretion: 

are defective owing to natural wear,  

have failures caused by malpractice or negligence of the customer, by incorrect installation, by 

tampering or interventions that are different from the instructions supplied by us. 

Warranty is void if damage is also caused by: 

- transport and/or bad storage of the product. 
- force majeure or catastrophic events (frost for temperatures < -20°C, fire, flooding, lightning, vandalism, and 
so on). 
 

All the above guarantees are the sole and exclusive agreement which supersedes any proposal 

or agreement whether written or oral 

and any other communication made between the producer and the 

purchaser with respect to the above. 

For any dispute the jurisdiction is Ascoli Piceno (Italy).  

 

Disposal of waste 

Western Co., as a producer of electrical device herein described and in 
accordance with Law No. 151 25/07/05, informs the buyer that this product, 
once divested, must be delivered to an authorized recycling center or, in case 
of purchase of equivalent equipment, it may be returned at no cost to the 
distributor of the new equipment. Penalties for those who get rid of an 
electronic waste will be used by individual municipalities. 

 
 
 
 
 

 

 
 
 
 
 
 

WESTERN CO. srl 

Via Pasubio 1 

63074 San Benedetto del Tronto (AP) - Italy 

tel + 39 0735 751248     fax +39 0735 751254 

e-mail: 

info@western.it

  

web:   

www.western.it

 

Summary of Contents for WMarine10















Reviews: