DATA LIFEGUARD TOOLS
USING DATA LIFEGUARD TOOLS – 8
USER MANUAL
7. Choose from the following options:
a) If your newly formatted drive is jumpered as Slave, you must change the setting to
Master and restart the computer.
b) If installing Windows, insert the Windows installation CD and restart the system.
Follow the on-screen instructions to install the operating system.
c) If an operating system is already installed, restart the system.
This concludes the hard drive setup process. Your WD hard drive is now ready to use.
Note:
Windows installation informs you that there is an existing partition on the drive. Since
the drive was set up previously using Data Lifeguard Tools, you can bypass this function and
proceed directly with Windows installation.
Install an Additional Storage Drive
1. Select
Set Up Your Hard Drive
from the Data Lifeguard Tools menu. Data Lifeguard
takes several moments to scan for system devices.
2. After Data Lifeguard Tools detects your installed hard drives, select the new drive that
you want to format or partition as an additional storage drive and click
Next
.
