EcoDesign Disclosures
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
Figure 36:
PDB-B Removal
Step 16 :
Remove power distribution board (PDB) A.
a.
Using a T10 Torx screwdriver, remove the two (2) screws holding PDB-A to the side of the
Chassis. The screws are accessed through holes in the side panel of the bay for IO Module
(IOM) A:
Figure 37:
PDB-A Screw Locations
b.
Using a T10 Torx screwdriver, remove the four (4) screws holding PDB-A to the midplane:
21